4029CR CNC Ready Lathe

$2,125.00

CNC Ready Lathe with Ball Screws is factory assembled wired up and ready to go. It has a 1/4 hp spindle motor and comes with an 5C spindle Headstock, 2 adjustable Tool Posts, and Nema 23 motor mounts. (does not include ‘X’ or ‘Z’ Axis motors, Control Box or Software)

Description

GENERAL

  • Height 14″
  • Width 24″
  • Depth 31″
  • Weight 90 lbs (with 5C Headstock)
  • Maximum spindle runout 0.0002 in. (5C)
  • X axis dovetails 45 deg.
  • Z axis dovetails 90 deg.
  • Leadscrews are 1/2″-20 on X & Z
  • Ball Screws are 12mm x 2.5mm on X & Z
  • All lead screw drives have friction adjustable micrometer dials in .001 inch increments
  • Pulley type std. 1 5/8 in. bore multi-step belt (5C).
  • Construction – Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy.

CAPACITY

  • Travel in X axis 11.375 in. (Ballscrew)
  • Travel in Z axis 6 in.
  • Max Rapid travel per axis 100 in/min (Ballscrew)
  • Table dimensions 3 1/2 x 18.4 inches
  • 4 spindle speeds 435-1800 RPM

SPINDLE (5C SPINDLE)

  • Spindle Runout less than .0002
  • Sealed precision ball bearing
  • Bearing OD 2.9528 in., ID 1.7717 in.
  • Spindle hole 1 1/8 in.
  • Spindle ID taper 10 deg (20 deg included)
  • Max. collet diameter 1 1/16 in.
  • Pulley size 1.625 in. bore.
  • Ball Bearings in all leadscrew bearing blocks

Additional information

Color

red, yellow

Call Now Button