3029 DSLS FULL CNC LATHE

$3,495.00

Full Blown CNC Lathe with 1/2-20 Leadscrews, 5C Headstock and DSLS closed loop control system for faster feeds. Includes 1/4 hp spindle motor, 5C spindle, 2 adjustable Tool Posts, chip guard, motors, control box, Digital Index Signal Processor for threading, Emergency off switch, spindle On-Off control module and Mach 3 software

Description

The TAIGTurn 3029 CNC Lathe is a top-of-the-line desktop CNC lathe. It is a very rigid and precise machine that uses some of the most advanced techniques to produce parts that used to require machines costing thousands of dollars more. With a rapid feed of up to 60 inches per minute, you can go from tool to tool in just seconds.

A key feature of the CNC Lathe is the ability to single point thread. This is accomplished using a “Digital Index Signal Processor” which was designed by Microproto Systems.

The main frame consists of a 2-1/2 inch square steel tubing, which provides a very solid feel. The lead screws are all 1/2″- 20, unlike a lot of similarly-sized machines that use 1/4-inch lead screws.

The moving slides ride on ground steel ways with full gib adjustments for wear as the years of use go by. Overall working accuracy should exceed .0005 with the leadscrews.

All machines are sold with a 14-day refund and a full 2-year factory warranty on all lathe components and accessories.

 

LATHE SPECIFICATIONS

GENERAL

Height 14″
Width 24″
Depth 31″
Weight 90 lbs (with 5C Headstock)
Maximum spindle runout 0.0002 in. (5C)
X axis dovetails 45 deg.
Z axis dovetails 90 deg.
Leadscrews are 1/2″-20 on X & Z
All lead screw drives have friction adjustable micrometer dials in .001 inch increments
Pulley type std. 1 5/8 in. bore multi-step belt (5C).
Construction – Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy.

CAPACITY

Travel in X axis 12 in. (Leadscrew)
Travel in Z axis 6 in.
Max Rapid travel per axis 60 in/min (Leadscrew)
Table dimensions 3 1/2 x 18.4 inches
4 spindle speeds 435-1800 RPM

SPINDLE (5C SPINDLE)

Spindle Runout less than .0002
Sealed precision ball bearing
Bearing OD 2.9528 in., ID 1.7717 in.
Spindle hole 1 1/8 in.
Spindle ID taper 10 deg (20 deg included)
Max. collet diameter 1 1/16 in.
Pulley size 1.625 in. bore.
Ball Bearings in all leadscrew bearing blocks

 

Additional information

Color

red, yellow

Call Now Button