4019CR CNC Ready Lathe

$1,625.00

CNC Ready Lathe with Ball Screws is factory assembled wired up and ready to go. It has a 1/4 hp spindle motor and comes with an ER 16 spindle, 3-Jaw Chuck, 2 adjustable Tool Posts, a set of 6 ER collets and Nema 23 motor mounts. (does not include ‘X’ or ‘Z’ Axis motors, Control Box or Software)

Description

GENERAL

Height 14″
Width 24″
Depth 31″
Weight 80 lbs (with ER Headstock)
Maximum spindle runout 0.0002 in. (ER16)
X axis dovetails 45 deg.
Z axis dovetails 90 deg.
Leadscrews are 1/2″-20 on X & Z
Ball Screws are 12mm x 2.5mm on X & Z
All lead screw drives have friction adjustable micrometer dials in .001 inch increments
Pulley type std. 5/8 in. bore multi-step belt (ER).
Construction – Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy.

CAPACITY

Travel in X axis 11.375 in. (Ballscrew)
Travel in Z axis 6 in.
Max Rapid travel per axis 100 in/min (Ballscrew)
Table dimensions 3 1/2 x 18.4 inches
4 spindle speeds 435-1800 RPM

SPINDLE (ER16 SPINDLE)

Spindle Runout less than .0002
Sealed precision ball bearing
Bearing OD 1.5748 in., ID 0.6692 in.
Spindle nose 22mm X 1.5mm
Spindle hole 0.406 in.
Spindle ID taper 8 deg (16 deg included)
Max. collet diameter 3/8 in.
Pulley size 5/8 in. bore.
Ball Bearings in all leadscrew bearing blocks

Additional information

Color

red, yellow

Call Now Button