Description
GENERAL
Height 14″
Width 24″
Depth 31″
Weight 90 lbs (with 5C Headstock)
Maximum spindle runout 0.0002 in. (5C)
X axis dovetails 45 deg.
Z axis dovetails 90 deg.
Leadscrews are 1/2″-20 on X & Z
Ball Screws are 12mm x 2.5mm on X & Z
All lead screw drives have friction adjustable micrometer dials in .001 inch increments
Pulley type std. 1 5/8 in. bore multi-step belt (5C).
Construction – Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy.
CAPACITY
Travel in X axis 12 in. (Leadscrew)
Travel in Z axis 6 in.
Max Rapid travel per axis 75 in/min (Leadscrew)
Table dimensions 3 1/2 x 18.4 inches
4 spindle speeds 435-1800 RPM
SPINDLE (5C SPINDLE)
Spindle Runout less than .0002
Sealed precision ball bearing
Bearing OD 2.9528 in., ID 1.7717 in.
Spindle hole 1 1/8 in.
Spindle ID taper 10 deg (20 deg included)
Max. collet diameter 1 1/16 in.
Pulley size 1.625 in. bore.
Ball Bearings in all leadscrew bearing blocks