The TAIGTurn 3019 CNC Lathe is a top-of-the-line desktop CNC lathe. It is a very rigid and precise machine that uses some of the most advanced techniques to produce parts that used to require machines costing thousands of dollars more. With a rapid feed of up to 600 inches per minute, you can go from tool to tool in just seconds.
A key feature of the CNC Lathe is the ability to single point thread. This is accomplished using a “Digital Index Signal Processor” which was designed by Microproto Systems.
The main frame consists of a 2-1/2 inch square steel tubing, which provides a very solid feel. The lead screws are all 1/2″- 20, unlike a lot of similarly-sized machines that use 1/4-inch lead screws.
The moving slides ride on ground steel ways with full gib adjustments for wear as the years of use go by. Overall working accuracy should exceed .0005 with the lead screws.
All machines are sold with a 14-day refund and a full 2-year factory warranty on all lathe components and accessories.
Weight 80 lbs (with ER Headstock)
Maximum spindle runout 0.0002 in. (ER16)
X axis dovetails 45 deg.
Z axis dovetails 90 deg.
Leadscrews are 1/2″-20 on X & Z
All lead screw drives have friction adjustable micrometer dials in .001 inch increments
Pulley type std. 5/8 in. bore multi-step belt (ER).
Construction – Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy.
Travel in X axis 12 in. (Leadscrew)
Travel in Z axis 6 in.
Max Rapid travel per axis 60 in/min (Leadscrew)
Table dimensions 3 1/2 x 18.4 inches
4 spindle speeds 435-1800 RPM
SPINDLE (ER16 SPINDLE)
Spindle Runout less than .0002
Sealed precision ball bearing
Bearing OD 1.5748 in., ID 0.6692 in.
Spindle nose 22mm X 1.5mm
Spindle hole 0.406 in.
Spindle ID taper 8 deg (16 deg included)
Max. collet diameter 3/8 in.
Pulley size 5/8 in. bore.
Ball Bearings in all leadscrew bearing blocks