TAIG TOOLS

Made in the U.S A.

Manufacturing desktop milling machines and lathes for over 40 years.

Home of the Micro Lathe, Micro Mill, and CNC Mill plus a complete line of parts and accessories.

We provide personal attention to your questions. Please contact us at:

Fax - 480.895.9648
sales@TaigTools.com
PHONE - 480.895.6978

TAIGTurn LATHES

X-Axis Hard Anodized Table with Steel Ways and a tapered Gib and Z-axis with square Steel ways

Hardened ER16 Spindle in Headstock for superior accuracy

Hardened 5C Spindle in Headstock for superior accuracy

The TAIGTurn 4029 CNC Lathe is a top of the line desktop CNC lathe. It is a very rigid and precise machine that uses some of the most advanced techniques that allows it to produce parts that used to be done on machines that cost thousands of dollars more. With a rapid feed of up to 100 inches per minute you can go from tool to tool in just seconds. A key feature of the CNC Lathe is the ability to single point thread. This is accomplished using a "Digital Index Signal Processor" which was designed by Microproto Systems. The main frame consists of a 2 1/2 inch square steel tubing to provide a very solid feel. The leadscrews are all 1/2-20 or 12mm x 2.5mm Ball Screws unlike a lot of machines of similar size that use 1/4 inch leadscrews. The moving slides ride on Ground Steel Ways with full gib adjustments for wear as the years of use go by. Overall working accuracy should exceed .0005 with Leadscrews or .0002 with Ball Screws. All machines are sold with a 14 day refund and a full 2 year factory warranty on all Lathe components and accessories.

TAIGTurn 4029CR (5C Ballscrew Lathe) 400-00 (5C Headstock)
TAIGTurn 3019CR TAIGTurn 3019 DSLS

LATHE SPECIFICATIONS

GENERAL

  • Height 14"
  • Width 24"
  • Depth 31"
  • Weight 80 lbs (with ER Headstock)
  • Weight 90 lbs (with 5C Headstock)
  • Maximum spindle runout 0.0003 in. (ER16)
  • Maximum spindle runout 0.0002 in. (5C)
  • X axis dovetails 45 deg.
  • Z axis dovetails 90 deg.
  • Leadscrews are 1/2"-20 on X & Z
  • Ball Screws are 12mm x 2.5mm on X & Z
  • All lead screw drives have friction adjustable micrometer dials in .001 inch increments
  • Pulley type std. 5/8 in. bore multi-step belt (ER).
  • Pulley type std. 1 5/8 in. bore multi-step belt (5C).
  • Construction - Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy.

CAPACITY

  • Travel in X axis 12 in.
  • Travel in Z axis 6 in.
  • Max Rapid travel per axis 75 in/min (Leadscrew)
  • Max Rapid travel per axis 100 in/min (Ball screw)
  • Table dimensions 3 1/2 x 18.4 inches
  • 4 spindle speeds 435-1800 RPM

SPINDLE (ER16 SPINDLE)

  • Spindle Runout less than .0003
  • Sealed precision ball bearing
  • Bearing OD 1.5748 in., ID 0.6692 in.
  • Spindle nose 22mm X 1.5mm
  • Spindle hole 0.406 in.
    • Spindle ID taper 8 deg (16 deg included)
    • Max. collet diameter 3/8 in.
    • Pulley size 5/8 in. bore.
    • Ball Bearings in all leadscrew bearing blocks

    SPINDLE (5C SPINDLE)

  • Spindle Runout less than .0002
  • Sealed precision ball bearing
  • Bearing OD 2.9528 in., ID 1.7717 in.
  • Spindle hole 1 3/16 in.
    • Spindle ID taper 10 deg (20 deg included)
    • Max. collet diameter 1 1/16 in.
    • Pulley size 1.625 in. bore.
    • Ball Bearings in all leadscrew bearing blocks

    TAIGTurn Accessory PRICES

    #400-00 This is the 5C spindle headstock. The spindle is heat treated and the angle is ground off of the bearings to ensure that the spindle runs within .0002. Includes the collet draw bar, pulley, spindle lock tool and spindle tighten tool (Weight 13 pounds) $599.99
    #4100ER TAIG Mill to Lathe Conversion kit with ER16 Headstock. This kit comes with all the parts to convert your TAIG Mill to a Lathe. It includes the following parts 1021W, 300-00ER, 300-24, 300-40, 300-42, 300-44, 2-300-45, 300-49, 300-50, 300-62, 300-64 plus a 1050ER (3-Jaw Chuck), 2 adjustable Tool Posts (2-300-75 ,300-76,300-77) and a set of 6 ER collets 1040ER). $699.99
    4105C5 TAIG Mill to Lathe Conversion kit with 5C headstock. This kit comes with all the parts to convert your TAIG Mill to a Lathe. It includes the following parts 1021W, 400-00, 300-24, 300-40, 300-42, 300-44, 2-300-45, 300-49, 300-50, 300-62, 400-64 plus 2 adjustable Tool Posts (2-300-75 ,300-76,300-77). (Weight 42 pounds) $1199.99

    CNC READY LATHE PRICES

    TAIGTurn 3019CR CNC Ready Lathe with 1/2-20 Leadscrews is factory assembled wired up and ready to go. It has a 1/4 hp spindle motor and comes with an ER 16 spindle, 3-Jaw Chuck, 2 adjustable Tool Posts, a set of 6 ER collets and Nema 23 motor mounts. (does not include 'X' or 'Z' Axis motors, Control Box or Software) $1200.00
    TAIGTurn 3029CR CNC Ready Lathe with 1/2-20 Leadscrews is factory assembled wired up and ready to go. It has a 1/4 hp spindle motor and comes with a 5C spindle Headstock, 2 adjustable Tool Posts, and Nema 23 motor mounts. (does not include 'X' or 'Z' Axis motors, Control Box or Software) $1700.00
    TAIGTurn 4019CR CNC Ready Lathe with Ball Screws is factory assembled wired up and ready to go. It has a 1/4 hp spindle motor and comes with an ER 16 spindle, 3-Jaw Chuck, 2 adjustable Tool Posts, a set of 6 ER collets and Nema 23 motor mounts. (does not include 'X' or 'Z' Axis motors, Control Box or Software) $1625.00
    TAIGTurn 4029CR CNC Ready Lathe with Ball Screws is factory assembled wired up and ready to go. It has a 1/4 hp spindle motor and comes with an 5C spindle Headstock, 2 adjustable Tool Posts, and Nema 23 motor mounts. (does not include 'X' or 'Z' Axis motors, Control Box or Software) $2125.00

    FULL CNC LATHE

    TAIGTURN 3019 DSLS Full Blown CNC Lathe 1/2-20 Leadscrews, ER16 Headstock and DSLS closed loop control system for faster feeds. Includes 1/4 hp spindle motor, 3-Jaw Chuck, 2 adjustable Tool Posts, 6 ER collets, chip guard, motors, control box, Digital Index Signal Processor for threading, Emergency off switch, spindle On-Off control module and Mach 3 software $2995.00
    TAIGTURN 3029 DSLS Full Blown CNC Lathe with 1/2-20 Leadscrews, 5C Headstock and DSLS closed loop control system for faster feeds. Includes 1/4 hp spindle motor, 5C spindle, 2 adjustable Tool Posts, chip guard, motors, control box, Digital Index Signal Processor for threading, Emergency off switch, spindle On-Off control module and Mach 3 software $3495.00
    TAIGTURN 4019 DSLS Full Blown CNC Lathe with Ball Screws, ER16 Headstock and DSLS closed loop control system for faster feeds. Includes 1/4 hp spindle motor, 3-Jaw Chuck, 2 adjustable Tool Posts, 6 ER collets, chip guard, motors, control box, Digital Index Signal Processor for threading, Emergency off switch, spindle On-Off control module and Mach 3 software $3395.00
    TAIGTURN 4029 DSLS Full Blown CNC Lathe with Ball Screws with 5C Headstock and DSLS closed loop control system for faster feeds. Includes 1/4 hp spindle motor, 2 adjustable Tool Posts, chip guard, motors, control box, Digital Index Signal Processor for threading, Emergency off switch, spindle On-Off control module and Mach 3 software $3895.00

    Tool Post Prices

    300-75 Adjustable Tool Post Main Body 52.00
    300-76 Tool Post Toolholder with slot to hold 3/8" tool. 38.00
    300-77 Tool Post Toolholder with two 3/8" diameter holes to hold 3/8" dia. tools. 38.00
    300-78 Tool Post Toolholder with two 5/8" diameter holes to hold 5/8" dia. tools. 38.00

    Shipping and Insurance costs for Lathes


    East Coast -------- $90.00
    Midwest ----------- $80.00
    Northwest --------- $65.00
    West Coast -------- $55.00

    Check Out Our Complete Line of
    Accessories !

    [Home] ["TAIG Videos"] [Micro Mill] [Micro Lathe] [CNC Mill] [Accessories]

    [Dealers] [Applications] [Starter Suggestions] [Metal Working Links]

    TAIG Tools, 12419 E. Nightingale Lane, Chandler AZ 85286.
    email - sales@TaigTools.com or Phone - 480.895.6978

    Copyright ©2017 TAIG Tools. All rights reserved.
    No part of this web site, including text, photos or illustrations may be reproduced
    or transmitted for commercial use without written permission from TAIG Tools.