ER16 SPINDLE

The ER Spindle is the newest major improvement to the TAIG Milling Machine.The ER16 Spindle is hardened and accepts the ER16 collet. The collets are very precise and come in size ranges rather than the typical collet that comes in a particular size. The ER16 collets come in size ranges from 1mm to 10 mm in increments of 1mm.

The advantage of having the ER spindle is that the mill can now accept up to a 3/8" shank cutter (use the 9-10 collet) and can also hold a 1/16 diameter cutter (1-2 collet). The collets are alot more accurate than the present TAIG collets and can be purchased at any tool supply house around (since the ER16 collet is one of the most common and accurate collets around)

MILL PRICES with the ER 16 Spindle ( Does not include shipping, see below)

2018ER	Micro Mill factory assembled (X travel 9.5 inches).	$810.00
2019ER	Micro Mill factory assembled (x travel 12 inches	$918.00
2018CR-ER	2018 converted to CNC ready with Nema 23 motor mounts, adjustable bronze leadscrew nuts, and upgraded 1/4 horse power motor . Does not include stepper motors or control system.	$1049.00
2019CR-ER	2019 converted to CNC ready with Nema 23 motor mounts, adjustable bronze leadscrew nuts, and upgraded 1/4 horse power motor . Does not include stepper motors or control system.	$1149.00
2026ER	2018 Full cnc mill with ER Spindle	$2155.00
2027ER	2019 Full cnc mill with ER Spindle	$2355.00
200-00ER	Complete headstock with ER Spindle	$120.00
200-03ERCT	ER Spindle Cartridge (spindle,2 bearings,spacer,ER nut)	$99.30
1040ER	ER 16 Collet Set (1/16, 1/8, 3/16, 1/4, 5/16, 3/8)	$59.00
1041ER-A	1/16" ER 16 Collet	$10.25
1041ER-B	1/8" ER 16 Collet	$10.25
1041ER-C	3/16" ER 16 Collet	$10.25
1041ER-D	1/4" ER 16 Collet	$10.25
1041ER-E	5/16" ER 16 Collet	$10.25
1041ER-F	3/8" ER 16 Collet	$10.25
1041ER-G	3/32" ER 16 Collet	$10.25
1041ER-H	5/64" ER 16 Collet	$10.25
1041ER-I	5/32" ER 16 Collet	$10.25
1041ER-J	1/32" ER 16 Collet	$10.25