TAIG TOOLS INTERNATIONAL

Manufacturing desktop milling machines and lathes for over 40 years.

Home of the Micro Lathe, Micro Mill, CNC Lathe and CNC Mill plus a complete line of parts and accessories.

We provide personal attention to your questions. Please contact us at:

Fax - 480.895.9648
sales@TaigTools.com
PHONE - 480.895.6978

PART# 1050ER - 3 Jaw Chuck ($74.00)

3 jaw 3 1/4 inch diameter self-centering scroll chuck (steel body) with reversable aluminum soft jaws, 22MM x 1.5MM thread mount,

The 3 jaw chuck is the easiest chuck to use. It can hold round and hex shaped materials. Unlike the 4 jaw chuck, the jaws on the 3-jaw chuck all move at the same time allowing the user to load and unload parts very quickly.Soft jaws are easy to bore out, thereby making the chuck run very concentric to the spindle.

When using 3 jaw chucks the operator should bore out the jaws to enable the chuck to run concentric to the spindle. To bore out the jaws you put a round washer in the back of the jaws (washer touching chuck body) and tighten down on it. You then take light cuts on the jaws with a boring bar to clean up the jaw tips. When done there will be a small protrusion on the jaws where the washer was. This can be removed with a file. Once bored out, the chuck should run concentric to the lathe.

[Home] [Micro Mill] [Micro Lathe] [CNC Mill] [CNC Lathe] [Accessories]

[Dealers] [Applications] [Starter Suggestions] [Metal Working Links]

TAIG Tools, 12419 E. Nightingale Lane, Chandler AZ 85286.
email - sales@TaigTools.com or Phone - 480.895.6978

Copyright ©2017 TAIG Tools. All rights reserved.
No part of this web site, including text, photos or illustrations may be reproduced
or transmitted for commercial use without written permission from TAIG Tools.