Manufacturing desktop milling machines and lathes for over 40 years.

Home of the Micro Lathe, Micro Mill, CNC Lathe and CNC Mill plus a complete line of parts and accessories.

We provide personal attention to your questions. Please contact us at:

Fax - 480.895.9648
PHONE - 480.895.6978

PART# 1026 - Depth Stop ($4.00)

Depth stop for workpiece in chuck

The Depth stop is mounted in the spindle and serves as a stop for the workpiece while using the 3 jaw or 4 jaw chuck. By using the Depth stop you are able to control the depth at which the workpiece is always stopped at. This allows you to chuck up numerous parts while maintaining the same machined depth each time. The stop can be adjusted by loosening the nut in the back and screwing the rod in or out and then tightening the nut again. The 30 degree collet like piece that fits in the spindle is threaded so that the stop rod can be adjusted for the desired depth.

[Home] [Micro Mill] [Micro Lathe] [CNC Mill] [CNC Lathe] [Accessories]

[Dealers] [Applications] [Starter Suggestions] [Metal Working Links]

TAIG Tools, 12419 E. Nightingale Lane, Chandler AZ 85286.
email - sales@TaigTools.com or Phone - 480.895.6978

Copyright ©2017 TAIG Tools. All rights reserved.
No part of this web site, including text, photos or illustrations may be reproduced
or transmitted for commercial use without written permission from TAIG Tools.